Industrial Radio
RF-Temp 500.4 provides wireless temperature monitoring over a distance of up to 500m.
Features

- Master unit - 4 analog (4-20mA) outputs representing a -10 to + 40C range.
- Sensor units (up to 4 per Master) - 1 digital temperature sensor.
- Up to 4 Masters can operate together within the same area providing monitoring for up to a total of 16 sensors.
- Operating distance up to 500m line of site.
- Repeaters can be used to extend the range.
- Sensors sample the temperature every 10 minutes & transmit the value to the Master if there is a change of more than 0.5C.
- If the temperature remains constant, then the value is transmitted every 30 minutes.
- 4-20mA outputs from the Master are latched @ the last transmitted value.
- If a value from the sensor is not received for 2 hours, then the Master output channel & LED are switched off.
- As soon as a value is received again from the sensor, the Master output channel & LED are switched on again.
- An out of range value of <-20 or >+50C will switch the channel off & flash the LED.
- Master - low voltage 12 to 28VDC supply.
- Sensor - internal battery supply, no external wiring required.
- A low battery condition on the sensor will be indicated by the corresponding channel LED flashing on the controller - the output channel will remain active.
- Pressing the test button on the sensor causes it to read the temperature & transmit the value every 10 seconds for 5 minutes - used during set up.
- No programming required.
- Low power radio that is licence free.
- For use in non hazardous areas & non safety critical applications.
Specification
- Sensor units - digital sensor with a usable range of -10 to +40C @ +/-0.5C accuracy.
- Master outputs - 4-20mA @ 10 bit resolution, requiring external excitation.
- Range - up to 500m line of site.
- Sensor supply - internal Alkaline (up to 1 year life), optional Lithium (up to 2 years life).
- Master power consumption - 50mA @ 24VDC.
- RF power output - 10dBm @ 433.92MHz - licence free.
- Master enclosure - ABS, 125x85x55mm, IP65 rating.
- Sensor enclosure - ABS, 71x71x27mm, wall mount.
- Master antenna - 1/4 wave whip with SMA male fitting - optional external antenna.
- Sensor antenna - inbuilt helical.
- Operating temperature - 10 to 50C.
- Cable gland & terminal connection.
Certification
- EN 301 489-3
- EN 300 220-3.
- EN 300 489.
- EN 60950.
- CEPT 70-03 Recommendation.
- R&TTE complience 1999/5/EC/Directive.
- Low Voltage Directive (LVD) 2006/95/EC.







