GSM Temperature Logger - New Product!

TempLog is a temperature & voltage logger with alarm inputs & control outputs.

Features

8 digital temperature sensor inputs.
3 analogue inputs - 0-10VDC.
3 alarm inputs.
2 relay control outputs activated by SMS.
Continuously logged data is saved to the log file.
The log file is automatically uploaded when the internal memory becomes full.
Approximately 3000 log entries can be stored.
Log interval time is adjustable down to a minimum of 5 seconds.
Data is saved in a semicolon-seperated log file which can be opened using Excel etc.
Dedicated TempLog Service System PC software handling programme.
Access list control ensuring only authorised personnel may control the unit.
Uses PAYG or contact SIM cards.
Individual alarm messages up to 160 characters.
Internal battery giving up to 18 hours backup.
SMS or call alarm under power fail conditions.
LED indication for power, signal strength & text sending.
Low voltage AC or DC supply.
Low power consumption.
Latest GSM modem platform technology.
Patch antenna as standard (optional antenna's for poor signal areas).
Plug in connectors for ease of wiring.
Small size for simple installation.
Status report from single text message.
All parameters can be configured remotely by PC software.
Fully compatable with Object Manager text & email handling software.

8 temperature sensor inputs - digital type DS18S20 with a range from -40 to 120 degrees C.
Sensors can be delivered with a cable length of up to 15 meters.
3 analogue inputs - 0-10VDC with 10 bit resolution.
Alarm inputs - volt free or 4-15VDC.
Control output relays - rated @ 1A/24VDC.
Interface - serial RS232, 9 pole sub D female.
GSM modem - tri-band, GSM/GPRS 900/1800/1900MHz.
Power supply - 9 to 35VAC/DC.
Power consumption - 30mA @ 12VDC nominal.
Power consumption - 1A @ 12VDC maximum.
Internal battery - giving up to 18 hours backup.
Size - 100x67x42mm.
Weight - 180g in aluminium DIN rail mount casing.
Operating temperature - -20 to 55 degrees C.
Connection - screw terminals